SNOW SKIING FOR PEOPLE WITH DISABILITIES

FREEDOM FACTORY REVOLUTION PRO COMP

The goal of our REVOLUTION  develop a mono-ski using a dampening system totally unique from any ever used in this type of application, to design a mono-ski suitable for a beginner but ideal for the experienced skier with a suspension that duplicated the action of the perfect suspension system (legs). The active system would feel soft on easy cruising runs, would firm up on bumpier stuff and really get stiff on the big bumps and higher speeds.
The REVOLUTION is designed around a suspension with 7" of bump travel. The performance capability of this system is vastly superior to anything before it. The heart of the system is a custom-engineered shock and a progressive link shock compression mechanism similar to those found on high performance moto-cross motorcycles.

The REVOLUTION PRO COMP is a radically different machine. It is not a rehash of existing mono-skis; it's totally unique. Take a ride on one and your feelings about how a mono-ski should ski will be changed forever. You have to ski it to believe it.

FRAME CONSTRUCTION Large diameter aircraft grade 4130 Chrome Moly Steel, TIG welded Urethane Powder Coated Finish	SKI MOUNTING Mounts into a standard step-in ski binding Center of Gravity location is at boot center; same as standup skier 4130 Chrome Moly Steel Mounting Foot
SEATING SYSTEM Flexible, form fit high or low back Coextruded polymer components	PROGRESSIVE RATE SUSPENSION SYSTEM 8" suspension travel Unloaded seat height above snow, approximately 16" Loaded seat height above snow, 10" (skiing height) Minimum seat height at full shock compression, 8"
SUSPENSION ADJUSTMENTS Ride height above the snow Minimum seat height at full shock compression Shock spring rate and Spring rate progression	SHOCK ABSORBER Internal valving designed specifically for mono-ski use Multi-stage Compression and Rebound Dampening Gas charged oil emulsion construction with Adjustable spring preload
RETENTION SYSTEM Foot, Knee and Thigh Retention Straps; Waist and Chest Straps Safety/Retention Strap and a 3 Point Evacuation System
Revolution Pro Comp Adult Mono-ski (ski not included) SN01 $5,200 p/h poa Revolution Pro Comp Junior Mono-ski (ski not included) SN02 $5,100 p/h poa

The MOGUL MASTER TWO (MMTwo) is a ski system that bridges the performance gap between a bi-ski and a mono-ski. The heart of the system is the unique articulation the two skis undergo when doing a turn.

The MMTwo turning system causes the skis to articulate similar to the way a stand-up skier would make a turn. When turning, the MMTwo angulates the downhill ski more than the uphill ski.

The MMTwo is self loading and has two latching lift positions. One raises the seat about 16" above the snow which allows for easier pushing in the lift line. The other latch position places the rider approximately 20" above the snow for loading on the chair. The latch releases when either the lift seat hits the shock absorber or when the ski is unweighted during lifting onto the chair lift.

The suspension system uses a conventional motorcycle shock and allows 2 1/2" of energy absorption travel. Spring preload can be set with the supplied tool.

WEIGHT  - 34 to 38 lbs approximately, depending on seat size
BUCKET SEAT - Gel-coated, lightweight fiberglass laminate, Packcloth covered high impact foam cushion, with 3 Point Evac System, Neoprene Chest/Shoulder Harness
FOOTREST - 4130 Chrome Moly, Tubular
FOOTREST LENGTH ADJUSTMENT - Approximately 7"
DISTANCE SEAT TO SNOW - Approximately 9"
FRAME - 4130 Chrome Moly, Tubular, Powder Coated
SUSPENSION SYSTEM - 4130 Chrome Moly leading link with two Chrome Moly trailing struts
SHOCK ABSORBER - Custom Motorcycle Shock
MOUNTING - Blocks
ANGULATION LIMITER - Hand adjustable to limit angulation from 15 ° to 45°
HARDWARE - All stainless steel with nylon insert locknuts
MOGUL MASTER Two Twin Junior also available; same features as adult but about 3/4 the size and weight.

Mogul Master Two Adult Bi/Twin Ski (skis not included) SN03 $5,500
Mogul Master Two Junior Bi/Twin Ski (skis not included) SN04 $5,200

The MOGUL MASTER V3 Junior mono-ski represents the best features of a mono-ski that has evolved over ten years of testing and customer requests.

The MOGUL MASTER V3 Junior has a center positioned lift handle with an easy loading feature that allows you to lift yourself to load height using the lift handle or by just putting your outriggers into the snow.

It automatically locks in the lift position and releases when you get on the chairlift. No forward leaning required. The two piece, adjustable seat, allows personal preference regarding forward lean.

WEIGHT - 18 lbs without ski, depending on seat size
WEIGHT LIMIT - 120 lbs
LIFT ASSIST RACHET - Places lift handle in mid-load position, and full load position
BUCKET SEAT - Gel-coated, lightweight fiberglass laminate, Packcloth covered high impact foam cushion, with 3 Point Evac System
FOOTREST - 4130 Chrome Moly, Tubular, Powder coated
DISTANCE SEAT TO SNOW - Nominally 10"
FOOT HEIGHT - 6-7" above snow
FRAME - 4130 Chrome Moly, Tubular, Powder Coated
SUSPENSION SYSTEM - 4130 Chrome Moly leading link with two Chrome Moly trailing struts
SHOCK ABSORBER - Coil over shock; Standard rebound dampening shock absorber
ADJUSTMENTS - Foot position, foot height, spring rate, center of gravity over the ski
MOUNTING - Stepin Type for use with a Binding
MOUNTING BLOCKS - 2 sets
HARDWARE - All stainless steel with nylon insert locknuts
OTHER - Does not include a ski, Choice of frame color, Seat Back Height
OPTION - StepIn type Mounting foot

Mogul MasterV3 Junior (skis not included) SN11 $2,400 p/h poa
Instructor Handle SN05 $ 95.00
Student Handle SN06 $95.00

The SNOW SLIDER has a wide range of adjustability that includes vertical twist of the cuff; forearm angle (both vertical and horizontal); forearm length; forearm height above the snow; arm width and ski wedge and cant.

It comes with a second pair of short "quick replaceable lower tubes" to turn this into a Junior. With both sets of 'lower tubes' it can accommodate individuals from approximately 6'7" to 3'.

All adjustments are by either 'skewer' or 'knob'; there are no tools needed to make adjustments. Tether attachments are located at binding and waist locations.

SPECIFICATIONS
Maximum Forearm Height
Adult = 46"
Child = 34"
Minimum Forearm Height
Adult = 34"
Child = 22"
Forearm Width Adjustment - 20" to 9"
Forearm angle (Vertical and Horizontal) - Unlimited
Forearm Cuff - Adjustable and foam padded
Adjustable Ski Wedge - 0 - 15° inward
Ski 'cant' adjustment - infinitely adjustable
Weight with skis - 14 lbs.
Ski Attachment - Mounting Brackets
Surface Finish - Powder coated and anodized
Options - Adaptor to convert to Stepin type Mounting, Instructor Handles Spreader Bar

Snow Slider without skis. SN07 $2,200 p/h poa
Instructor Handles SN08 $95
Spreader Bar SN09 $ 150
Feet Adaptor for binding use SN10 $250

This great wheelchair enables people with disabilities to have access to environments which are otherwise inaccessible. It is ideal for getting around the village. Not suitable for steep slopes.

PRODUCT INFORMATION
Aussie Snow Wheelchair BE02
PRICE: $2,600.00
FREIGHT: POA
TIME OF DELIVERY FROM ORDER DATE:
6 Weeks (Australia)

Please note that the snow wheelchair comes complete with removable armrests and footrest for easy transfers.  A wide choice of colours are available.

FEATURES

• Stainless steel fixed frame
• Plastic moulded, self draining seat
• Nobby tread on all wheels
• Larger wheels on front for ease of pushing
• Front wheels 22” diameter
• Back wheels 14” diameter
• Corrosion free plastic wheel hubs
• Front and back wheels removable for transportation
• Side handles for lifting wheelchair
• Choice of colours

• Width : 840mm
• Height: 860mm
• Seat Height: 530mm
• Length: 1050mm
• Transporting size with wheels removed:
  660mm x 1250mm x 470mm
• Boxed size for freight - 730m x 570m x 1200m
• Outer width - big wheels - 840mm
• Inner width - big wheels - 355mm
• Outer width - small wheels - 720mm
• Inner width - small wheels - 415mm